Fabia Mk1
Exhaust manifold and pre-exhaust pipe with catalytic converter - Summary of components |
1 - | Connector |
q | 6-pin, black |
q | for lambda probe upstream of catalytic converter |
2 - | 10 Nm |
3 - | 25 Nm |
q | coat with hot bolt paste -G 052 112 A3- |
4 - | 30 Nm |
5 - | Connecting pipe |
6 - | 25 Nm |
q | replace |
q | coat with hot bolt paste -G 052 112 A3- |
7 - | Nipple, 35 Nm |
q | replace |
8 - | Gasket |
q | replace |
9 - | Retaining strap |
q | replace if damaged |
10 - | Lambda probe 2 after catalytic converter -G131-, 50 Nm |
q | coat only thread with hot bolt paste -G 052 112 A3-; hot bolt paste must not get into the slot of the probe body |
q | use lambda probe wrench for removing and installing |
11 - | Connector |
q | 4-pin |
q | for lambda probe downstream of catalytic converter |
12 - | to the central silencer |
13 - | Pre-exhaust pipe |
q | with catalytic converter |
q | protect against shocks and blows |
q | if the pre-exhaust pipe should be reinstalled, the transport security -T10403- must be secured to the decoupling element against over-tensioning or bending |
14 - | 40 Nm |
q | replace |
q | coat with hot bolt paste -G 052 112 A3- |
15 - | Exhaust manifold |
16 - | Gasket |
q | replace |
17 - | Heat shield |
18 - | Lambda probe upstream of catalytic converter -G39-, 50 Nm |
q | coat only thread with hot bolt paste -G 052 112 A3-; hot bolt paste must not get into the slot of the probe body |
q | use lambda probe wrench for removing and installing |