skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Leak check > < Testing components

Fabia Mk1

Checking the tightness of the injection valves and the fuel injection rate
Checking the tightness of the injection valves and the fuel injection rate
Special tools and workshop equipment required
t  Remote control, e.g. -V.A.G 1348/3A-
t  Adapter cable, e.g. -V.A.G 1348/3-2-
t  Measuring tool set, e.g. -V.A.G 1594 C-
t  Measuring glasses, e.g. -V.A.G 1602-
   
l  Remove fuse No. 61.
Test preparation
–  Remove the fuel distributor together with the injection valves from the bottom part of the intake manifold → Chapter.
  Note
t  The fuel hoses remain connected.
t  The injection valves remain stuck in the fuel distributor.
–  Connect the remote control -V.A.G 1348/3A- with adapter -V.A.G 1348/3-2- between contact -61a- of the line to the fuel pump (de-energized) and to battery positive (+).
  Note
t  The fuel pump will run after operating the remote control.
t  This step is only intended to ensure that the fuel pump runs when the engine is switched off.
  S01-0094

Leak check > < Testing components