skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Testing fuel gauge (adjustment) > < Adapting the service interval display when replacing the dash panel insert (QG1 - MY 07, QG1 and QG2)

Fabia Mk1

Adjust momentary fuel consumption gauge
Adjust momentary fuel consumption gauge
  Note
t  Adjustment of momentary fuel consumption gauge can only be performed on vehicles fitted with multifunction display and dash panel inserts (6Y1 xxx xxx x and 6Y2 xxx xxx x).
t  It is only possible to make an entry of between 85% and 115%.
t  The entry must be made in steps of 5%.
–  Enter 03 and confirm with Q.
   
Readout on display:
–  Press →.
  Note
It is only possible to make a direct entry with the keypad of the Vehicle system tester -V.A.G 1552-!
  
Channel 3  Adjustment     100         ->
                               -↑  ↓-
Readout on display:
–  Enter adjustment value in range 00085 - 00115.
  Note
If a value of more than 00115 or less than 00085 is entered the “adjustment” function is ended and it is then necessary to recommence with the function “10 - adjustment”!
  
Channel 3    Adaptation     100
Enter adjustment value	             xxxxx
Readout on display:
–  Confirm with Q.
  
Channel 3      adjustment      100       Q
Enter adjustment value   00093
Readout on display:
–  Confirm with Q.
  
Channel 3      adjustment     093       Q
                                -↑  ↓-
Readout on display:
–  Confirm with Q.
  
Channel 3      adjustment     093       Q
Store changed value?
Readout on display:
–  Press →.
  
Channel 3      adjustment      093     ->
Changed value stored
Readout on display:
–  Enter function 06“End output” and confirm with Q.
  
Vehicle system test                 HELP
Select function XX

Testing fuel gauge (adjustment) > < Adapting the service interval display when replacing the dash panel insert (QG1 - MY 07, QG1 and QG2)