skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Adapting odometer reading > < Measured value block 201

Fabia Mk1

Adjustment
Adjustment
The following changes can be made with the “adjustment” function:
t  Adjustment of momentary fuel consumption gauge
t  adjustment (reset) of service interval display (SID)
t  adjustment of odometer when the dash panel insert is replaced
t  Adaptation of the speedometer constant when the dash panel insert is replaced
t  adjustment of fuel gauge
t  adjustment of service interval display
The individual functions are retrieved by entering the relevant number of the adaptation channel (refer to adaptation table).
Adaptation table up to MY06:
   
adjustment channeladjustment function
02adjustment (reset) of service interval display
03adjustment of momentary fuel consumption gauge → Chapter (only for dash panel inserts 6Y1 xxx xxx x und 6Y2 xxx xxx x)
04Language versions (only dash panel insert with MAXI  DOT display) - 1 = German, 2 = English, 3 = French, 4 = Italian, 5 = Spanish, 6 = Portuguese, 7 = not assigned, 8 = Czech
05Adjust OIL value (km intervals - in thousands of kilometres), usually 15 - only for QG0
06Adjust INSP value (km intervals - in thousands of kilometres), usually 30 - only for QG0
07Adjust INSP value (time intervals - in months), usually 12 - only for QG0
09Adjustment of the odometer reading → Chapter
10Service interval data for oil service (OIL service) - distance counter → Chapter - only for QG0
11Service interval data for inspection service (INSP service) - distance counter → Chapter - only for QG0
12Service interval data for inspection service (INSP service) - counter for days → Chapter - only for QG0
16only intended for reading out the current tachometer constant (only for dash panel inserts 6Y1 xxx xxx x und 6Y2 xxx xxx x)
21Adapt ignition key → Chapter
30Adapt fuel gauge → Chapter
39 - 49Service intervals → Chapter
50Adapt immobilizer → Chapter

Adaptation table MY 07: (dash panel insert 6Y0 920 xx3 x)
   
adjustment channeladjustment function
02adjustment (reset) of service interval display
04Language versions (only dash panel insert with MAXI  DOT display) - 1 = German, 2 = English, 3 = French, 4 = Italian, 5 = Spanish, 6 = Portuguese, 7 = not assigned, 8 = Czech
09Adjustment of the odometer reading → Chapter
21Adapt ignition key → Chapter
30Adapt fuel gauge → Chapter
39 - 49Service intervals → Chapter
50Adapt immobilizer → Chapter

  Note
t  First perform a log-in procedure before adapting the odometer reading in channel 9 and the speedometer constant in channel 16 → Chapter.
t  Subsequently proceed with function “10 - adjustment”.
Performing function “10 - adjustment”
   
Readout on display:
–  Enter function 10“Adjustment” and confirm with Q.
  
Vehicle system test                 HELP
Select function XX
Readout on display:
–  Enter the desired adjustment channel (adjustment table → Anchor).
  Note
After altering an adjustment value or quitting an adjustment channel, it is necessary to once again perform the function “10 -adjustment” in order to select another adjustment channel!
  
Adjustment
Enter channel number XX

Adapting odometer reading > < Measured value block 201