skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Self-diagnosis of the Gateway > < List of display groups

Fabia Mk1

Adjustment
Adjustment
The following changes can be made and stored with the “Adaptation” function:
t  Terminal 30 disconnect-restore
t  Switch-off time for heated windscreen
t  Switch-off time for heated exterior mirrors
t  Switch-off time for heated rear window
t  Time for tailgate remote unlocking after locking
t  Convenience driving direction indicator, activation time
t  Convenience driving direction indicator, number of cycles
t  Additional wiper cycle after washing
t  Headlight cleaning system (actuation frequency of the wiper lever required for the washing the headlights)
What are retrieved are the individual functions by entering the respective number of the adjustment channel (see adjustment table → Anchor).
  Note
t  In the case of adjustment of the individual channels on control units with index B (6Q0937049B) and without an index (6Q0937049) one should first select function 11 - Login → Chapter and then enter code number 21343.
t  The function 11 - Login - is no longer needed from the control units with Index C (6Q0937049C).
Adaptation table
   
adjustment channeladjustment functionRange of values on the time range indicator
Basic value on the display
Basic value for the time
01Terminal 30 disconnect-restore1 ... 253
40.96 s ... 173 min		44
30 min
03Switch-off time for heated exterior mirrors1 ... 253
40.96 s ...173 min
254 infinite activation time 		29
20 minutes (for vehicles up to 04.02)
254
without switching off (for vehicles as of 05.02)
04Switch-off time for heated rear window1 ... 253
40.96 s ... 173 min
254 infinite activation time		29
20 min
05Time for tailgate remote unlocking1 ... 254
320 ms ... 81.6 s		3
1 second
06 1)Convenience driving direction indicator, number of cycles0 ...53
07 1)Additional wiper cycle after washing0 ... 255 s5
5 second
08 1)Headlight cleaning system (actuation frequency of the wiper lever required for the washing the headlights)0 ...105
09 1)Cycles for on-position of the heated rear window 2) 0 ... 1
0 = off
1 = on		1

1) not valid for units without index and with index B and C
2) Value 0 - the deactivation cycles of the rear window heating set in the channel 04 are repeated when switching on again, Value 1 - the rear window is heated constantly when switching on the rear window heating again. 
Performing function 10 “Adaptation”
   
Readout on display:
–  Enter function 10“Adjustment” and confirm with Q.
  
Vehicle system test                 HELP
Select function XX
Readout on display:
–  Enter the desired adjustment channel (adjustment table → Anchor).
  Note
Perform adaptation according to vehicle equipment.
The adjustment process is explained taking the example of channel “04 - switch-off time of the heated rear window”. Adaptation is performed in a similar way for the other adaptation channels.
–  Enter channel number 04 and confirm with Q.
  
Adjustment
Enter channel number XX
Readout on display:
–  Press → key.
  
Channel 04     Adjustment 0          →
                 ( ↑ ↓ )
Readout on display:
–  Refer to the “Adaptation table” for the desired adaptation value and enter it with the keypad.
  
Channel 04     Adjustment 0
Enter adjustment value  XXXXX
Readout on display:
–  Confirm the entry with Q.
  
Channel 04     Adjustment 0          Q
Enter adjustment value 00020
Readout on display:
–  Press → key.
  
Channel 04     Adjustment 20          →
                ( ↑ ↓ )
Readout on display:
–  Confirm the entry with Q.
  
Channel 04     Adjustment 20          Q
Store changed value?
Readout on display:
–  Press → key.
  
Channel 04     Adjustment 20          →
Changed value stored
Readout on display:
Adaptation is completed.
  
Vehicle system test                 HELP
Select function XX

Self-diagnosis of the Gateway > < List of display groups