skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Interior Lights > < Adaptation the immobiliser after insertion of a used immobiliser control unit

Fabia Mk1

Requirements
Requirements
l  The secret number of the immobiliser control unit of the vehicle from which the engine control unit was removed is available.
l  The secret number of the immobiliser control unit of the vehicle in which the engine control unit is fitted is available
   
Readout on display:
–  Enter address word 01“engine control unit” and confirm the entry with Q → Engine, Fuel Injection; Rep. Gr.01.
  
Vehicle system test                 HELP
Enter address word XX
Readout on display:
–  Enter function 11“Log-in procedure” and confirm with the key Q.
  
Vehicle system test                 HELP
Select function XX
Readout on display:
–  Enter the secret number of the immobiliser control unit of the vehicle from which the engine control unit was removed and confirm with Q.
  
Login procedure
Enter code number  XXXXX
Readout on display:
–  Enter function 10“Adjustment” and confirm with Q.
  
Vehicle system test                 HELP
Select function XX
Readout on display:
–  Enter 50 for “channel 50” and confirm with Q.
  
Adjustment
Enter channel number XX
Readout on display:
–  Press →.
  
Channel 50  Adjustment     32000         ->
PIN?                          (- ↑  ↓-)
Readout on display:
–  Enter the secret number of the immobiliser control unit (e.g. 04038) of the vehicle in which the used engine control unit is already installed, and confirm the entry with Q.
  
Channel 50      adjustment      32000       Q
Enter adaptation value  XXXXX   ↑  ↓
Readout on display:
After approx. 4 to 5 seconds the vehicle number is displayed.
  
Channel 50  Adjustment     32000         ->
Wait                           (- ↑  ↓-)
Readout on display:
–  Confirm the entry with Q.
  
Channel 50      adjustment      32000       Q
TMBMC46Y0Y7000001                (-↑ ↓-)
Readout on display:
–  Confirm the entry with Q.
  
Channel 50      adjustment      32000       Q
Store changed value?  ↑  ↓
Readout on display:
–  Press →.
  
Channel 50  Adjustment     32000         ->
Changed value stored
Readout on display:
–  Press →.
The immobilizer warning light -K115 - goes out.
  
TMBMC46Y0Y7000001    SKZ7Z0W0204038   ->

      

      

    
      

      

    
Readout on display:
– 
          Enter function 06“End output” and confirm with Q.
– 
          Switch off ignition.

      		 
      
    
Vehicle system test                 HELP
Select function XX

      

      

    


Interior Lights >
< Adaptation the immobiliser after insertion of a used immobiliser control unit