skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Ungluing a halogen headlight > < Replacing bulb for the fog light

Fabia Mk1

Removing and installing the headlight range control motor
Removing and installing the headlight range control motor
  Note
If the poistioning motors for the headlight range control are removed and installed or replaced, always check the setting of the headlight beam with the headlight beam setting device. The angle of the inclination is indicated on the rubber headlight housing.
Removing
   
–  Remove the cover by pressing down the clamps -arrows- and then remove the cover towards the rear.
  S94-0093
–  Disconnect the plug connection at the control motor -arrow-.
–  Release the control motor by turning to the left (for the left headlight) -arrow- and Take the motor downwards out of the catch on the reflector (for the right headlight release by turning to the right and take the motor upwards out of the catch on the reflector).
Install
  S94-0089
–  Fit the spherical positioning shaft of the control motor in the ball head mount -arrow- (left headlight from the top, right headlight from the bottom). Hold the reflector with the hand at the appropriate height while doing this.
–  Unlock the control motor by turning it in its initial position.
  S94-0097

Ungluing a halogen headlight > < Replacing bulb for the fog light