skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Adjustment > < Coding park aid control unit

Fabia Mk1

Reading measured value block
Reading measured value block
For fault finding, display the status of the input signals in the measured value blocks.
Procedure
–  Connect vehicle system tester → Chapter.
   
Readout on display:
–  Enter 08 for the function “Read measured value block” and confirm entry with the Q.
  
Vehicle system test                 HELP
Select function XX
Readout on display:
–  Enter the desired three-digit display group number and confirm entry with the key Q.
  
Read measured value block              Q
Enter display group number      XXX
Measured value block 001
    
 Reading measured value block 1→Readout on display
 50 cm110 cm90 cm50 cm 
     Distance sensor, rear right
t  0 to 200 cm
    Distance sensor, rear right, middle
t  0 to 200 cm
   Distance sensor, rear left, middle
t  0 to 200 cm
  Distance sensor, rear left
t  0 to 200 cm
  

   
Measured value block 002
    
 Reading measured value block 2→Readout on display
 50 cm20 km/hSignal off.Light OFF 
     Warning light
t  Light ON
t  Light OFF a)
    Warning buzzer
t  Signal on.
t  Signal off.
   Vehicle speed
t  0 through 300 km/h
  Minimum distance
t  Minimum distance of the four distances measured
  

a) Also displayed if warning light not fitted
   
Measured value block 003
    
 Reading measured value block 3→Readout on display
 o.k.Rev. yesTr. noactivated 
     Function button
t  Clearance a)
t  not activated
    Trailer display
t  Tr. yes
t  Tr. no
   Reverse gear display
t  Rev. yes
t  Rev. no
  Park system status
t  o.k.
t  n.o.k.
  

a) Also displayed if function button not fitted
   

Adjustment > < Coding park aid control unit