| Fixing the B+ wire to the generator |
| Tightening torque for the fixing nut of the B+ cable -arrow- is 15 Nm. |
Note | t
| The screw connection for the B+ cable at the compact generator is identified with B1+! |
| t
| If the B+ cable is not attached with the specified tightening torque, this may result in the following risks: |
| –
| the battery will not charge fully |
| –
| Complete failure of the vehicle electrics/electronics (breakdown) |
| –
| Spark formation may cause a fire |
| –
| Damage resulting from overvoltages on the electronic components and control units |
|
|
|
