Workshop Repair Manuals

Skoda Workshop Manuals

[PREV PAGE] [NEXT PAGE]

skoda Workshop Repair Guides


Fabia Mk1

Vehicle electrics > Electrical System > Windscreen wipe/wash system > Windscreen wiper and washer system > Removing and installing windshield washer fluid reservoir

Removing and installing windshield washer fluid reservoir
Removing and installing windshield washer fluid reservoir
Removing
–  Remove left wheelhouse liner → Body Work; Rep. Gr.66 and front shock absorber → Body Work; Rep. Gr.63.
   
–  Release plug from the washer fluid pumps for windscreen -3-, for headlight -7- and from sensor for washer fluid level -1-.
–  Grip the angular pieces of the windscreen washer hoses -2- and -5- consecutively with pliers and by pulling the axle carefully detach from the washer fluid pump -4- (do not lever off). Collect the flowing out washer fluid in a suitable vessel.
–  To unlock press the securing clamp and pull off hose with coupling -8- from the washer fluid pump for headlight -6-.
–  If necessary slide the washer fluid pumps out of the windshield washer fluid reservoir to the top (turn the washer fluid pump for headlight -6- to the left to approx 90° before sliding out).
  S92-0080
–  Remove cap from reservoir supports.
–  Screw out the four nuts -arrows- (5 Nm) and remove windshield washer reservoir downwards.
  Note
The headlight and the battery is not shown for the purpose of clear presentation, they must not be removed.
Install
Installation is performed in the reverse order. Pay attention to the following points:
–  Hoses with angled pieces must click firmly into the connections on the washer fluid pumps.
  S92-0078

Vehicle electrics > Electrical System > Windscreen wipe/wash system > Windscreen wiper and washer system > Removing and installing windshield washer fluid reservoir

[PREV PAGE] [NEXT PAGE]