skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Waiting time > < Prepare flange for fitting

Fabia Mk2

Glueing
Glueing
   
–  After completing the preparations cut the nozzle for applying the glue into shape as shown in the figure.
–  Dimension -a- 12 mm.
–  Bead width 8 mm.
–  Application direction -arrow-.
  Note
t  The bead section is dependent on the section of the nozzle and the application speed.
t  When using a 1K window pane component glue -DH 009 100- or -DH 009 100 03-, preheat the glue cartridges for 20 minutes in the warming box e.g. -V.A.G 1939--V.A.G 1939-.
t  Use disposable gloves when working with glues and adhesive materials.
  WARNING
Comply with the manufacturer's handling instructions.
  S64-0022
–  Apply the adhesive cement to the sealing section -1- perpendicularly to the window surface and all around it.
  Note
t  Apply adhesive cement at a temperature of 10 to 30°C.
t  Open all vehicle windows before fitting the window into the frame.
–  Insert window pane into the frame with the aid of two suction cup tools e.g. -V.A.G 1344-, centre and press onto the spacer catches.
  WARNING
Fit the window pane immediately as otherwise the adhesive properties of the adhesive cement decrease considerably.
–  Insert window pane in frame using pane positioning wedges or eccentric pieces (applies for the windscreen).
–  Fix the window during hardening process with adhesive tape.
–  Any adhesive cement which was applied too thickly and is pressed out up to the heating filaments of the rear window heating must be removed.
  S64-0068

Waiting time > < Prepare flange for fitting