skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Removing and installing handbrake lever handle > < Covers, storage areas and trim panels
Summary of components of centre console
   
Summary of components of centre console
1 - Centre console
Removing:
–  Disconnect battery earth strap → Electrical System → Rep. gr.27.
–  Remove cover for gearshift lever → Gearbox → Rep. gr.34.
–  Remove handbrake lever handle → Chapter.
–  Remover cover for left sustainer -6-.
–  Remove fixing screw -12- for armrest.
–  Remove armrest -7- from the top.
–  Unclip cap -4-.
–  Remove covers -3- and -11- for screws of the centre console.
–  Remove fixing screws -2- for centre console.
–  Pull on the handbrake and partly push the centre console upwards.
–  Disconnect plug connections for switch and igniter → Electrical System → Rep. gr.96.
–  Remove centre console from vehicle.
Installing:
–  Installation is carried out in the reverse order.
–  Pay attention to the sequence when connecting the battery → Electrical System → Rep. gr.27.
2 - 1.5 Nm
3 - Screw cap
4 - Cap
5 - Storage area (depending upon vehicle equipment)
6 - Cover for left sustainer (depending upon vehicle equipment)
7 - Armrest (depending upon vehicle equipment)
Removing:
–  Remove centre console (Pos. 1).
–  Remove screws (Pos. 13) and take off sustainer.
Installing:
Installation is carried out in the reverse order.
8 - Cover for right sustainer (depending upon vehicle equipment)
9 - Adapter
10 - 14 Nm
11 - Screw cap
12 - 14 Nm
13 - 7 Nm
14 - Sustainer (depending upon vehicle equipment)

   

Removing and installing handbrake lever handle > < Covers, storage areas and trim panels