skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Door adjustment > < Summary of components of rear door
Removing and installing the rear door
Removing and installing the rear door
  Note
Switch off the ignition and all electrical components.
   
Removing:
–  Pull off the bellows -6- from pillar B.
–  Remove bottom trim panel of pillar B → Chapter.
–  Disconnect plug connection -2-.
–  Remove screw -3- → Chapter from door arrester -1-.
–  Remove screw -5- → Chapter from the hinges -4-.
–  Hook out the door upwards.
Installing:
–  Installation is carried out in the reverse order.
  S58-0104

Door adjustment > < Summary of components of rear door