Fabia Mk2
| Assembly overview of covers and upholstery for rear backrest (corner seats) |
| 1 - | Backrest upholstery |
| q | Removing: |
| – | Remove headrests (Pos. 2). |
| – | Detach clamping section (Pos. 8). |
| – | Open up zip fastener on both backrest sides (Pos. 6). |
| – | Release headrest guides (Pos.3) at the point of the -arrow-. |
| – | Cut through the retaining clips (Pos. 9). |
| – | Remove cover from backrest. |
| q | Installation is carried out in the reverse order. |
Note| Make sure that the cover is correctly taken out. |
| 2 - | Headrest |
| 3 - | Headrest guides |
| q | Removing: |
| – | Release securing mechanisms at the point of the -arrow-. |
| – | Pull guide upwards. |
| q | Installing: |
| – | Clip guide downwards into the backrest rack. |
| 4 - | Backrest rack |
| 5 - | Seat |
| 6 - | Zip fastener |
| 7 - | Foam padding |
| q | Removing: |
| – | Remove cover (Pos. 1). |
| – | Remove foam padding from backrest rack. |
| q | Installation is carried out in the reverse order. |
| 8 - | Clamping section |
| q | Sewn to cover |
| 9 - | Retaining clips |
| q | When removing cut through with pliers |
| q | To install use upholstery pliers, use e.g. -V.A.G 1634-, -V.A.G 1634-. |
