Fabia Mk2
Removing and installing trim panel on driver's door |
1 - | Front door trim panel. |
Removing: |
– | Switch off the ignition and all electrical components. |
– | Lever out cover for door handle -5- from bottom to top with e.g. door panel inner trim removal tool -MP8-602/1-. |
– | Remove fixing screws -7- for door trim panel. |
– | Remove screws -6-. |
Vehicles with power windows |
– | Lever out switch unit for power windows -8- → Electrical System; Rep. gr.96. |
– | Disconnect the plug connection. |
For all vehicles |
– | Unclip trim panel with e.g. removal tool for the inner lining of the door panel -MP8-602/1-. |
– | Unhook the control cable from the interior door handle -4-. |
– | Disconnect plug connection for speaker, mirror adjustment (depending upon equipment). |
– | Slightly raise trim panel -1- upwards and remove. |
Installing: |
– | Installation is carried out in the reverse order. |
– | Replace clips with new ones if damaged. |
2 - | Front door |
3 - | Bolt |
4 - | Interior door handle |
5 - | Door handle |
6 - | 4 Nm |
7 - | 0.7 Nm |
8 - | Switch unit for power windows |
9 - | Insertion nut |