skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Removing and installing brake shoe - Drum brake > < Checking the wheel-brake cylinder for tightness
Checking the brake pad thickness through the inspection hole in the brake carrier.
   
Checking the brake pad thickness through the inspection hole in the brake carrier.
–  Unclip cap -1- from the brake carrier-2-.
–  Checking the brake pad thickness through the inspection hole in the brake carrier.
   Minimum pad thickness without supporting shoe (wear dimension) → Chapter.
  Note
The brake pads must not be soiled with brake fluid or grease.
  S46-0094

Removing and installing brake shoe - Drum brake > < Checking the wheel-brake cylinder for tightness