Fabia Mk2
| Summary of components of engine pump aggregate TRW |
| The engine pump aggregate: |
| t | Is a complete component consisting of the steering hydraulics pump -V119- (electric motor and gear rack pump), the power-steering control unit -J500- and the hydraulic oil reservoir. |
| t | It is has a re-engaging protection after faults, failure or crash → Chapter. |
Note| t | No provision is made for repairing at the engine pump aggregate. |
| t | The cause of any problems which may be arising is determined by the pressure and tightness test. |
| t | If there is insufficient hydraulic oil in the reservoir always check the steering system for tightness. |
| t | If there is a leak in the area of the line connection first check the lines/line connections for tightness, if necessary retighten and wipe dry. |
| t | Do not use drained hydraulic oil again. |
| t | Always replace gasket rings. |
| t | Oil type: hydraulic oil → Chapter |
| 1 - | Screw cap |
| q | with oil dipstick |
| 2 - | Sealing ring |
| 3 - | Reservoir |
| q | replace → Chapter |
| 4 - | Clamp |
| q | replace after each removal |
| q | different versions |
| q | Assignment → Electronic Catalogue of Original Parts |
| q | Tightening torque: 3 Nm |
| 5 - | Sealing ring |
| q | different versions |
| q | Assignment → Electronic Catalogue of Original Parts |
| 6 - | Nut, 7 Nm |
| q | when tightening counterhold on rubber bearing - Pos. 7 |
| 7 - | Rubber bearing |
| q | Tightening torque: 7 Nm |
| q | in case of damage (tears in rubber, rubber torn away from metal plate) - replace |
| 8 - | Engine pump aggregate |
| q | includes the steering hydraulics pump -V119- and power-assisted steering control unit -J500- |
| q | no provision made for repairs |
| q | Replacing reservoir → Chapter |
| q | check → Chapter |
| q | Self-diagnosis → Chapter |
| q | removing and installing → Chapter |
| 9 - | Screw, 20 Nm + 90° |
| q | replace after each removal |
| 10 - | Support |
| q | for engine pump aggregate |
| 11 - | Spring clip |
| q | install with assembly pliers |
| 12 - | Return-flow line |
| q | power-assisted steering gear - engine pump aggregate |
| 13 - | O-ring |
| q | replace after removing the pressure line |
| 14 - | Pressure line |
| q | Tightening torque of the pipe screws: 30 Nm |
| q | Engine pump aggregate - Power-steering gear |
