| Removing and installing steering column |
| Special tools and workshop equipment required |
| t
| Vehicle diagnosis, measurement and information system -VAS- |
| t
| Adhesive tape (commercially available) |
Note | t
| New steering columns supplied as spare parts are secured for transport. This transport security must be removed once the steering column has been installed. |
| t
| Steering columns are supplied as a spare part with ignition lock housing but without lock cylinder and ignition starter switch. The lock cylinder and ignition starter switch must be removed from the removed steering column or be obtained and installed as a spare part. |
| t
| Do not carry out repair work on the steering column. |
| t
| Always replace the self-locking nuts and screws. |
| t
| Replace the affected screws and nuts. |
|
|
|
