| Removing and installing parts of the cooling system - Summary of components |
Note | t
| When the engine is warm the cooling system is under pressure. Reduce pressure before repairs. |
| t
| The hose connections are secured with spring-type clips. In the event of repairs only use spring-type clips. |
| t
| Use pliers for spring strap clips for installing the spring strap clips. |
| t
| Always replace seals and gasket rings. |
| t
| When installing fit the coolant hoses free of stress, without them touching any other components (pay attention to the marking on the coolant connection and hose). |
| Parts of the cooling system fitted to body → Chapter. |
| Parts of cooling system engine side → Chapter |
| connection diagram for coolant hoses → Chapter |
| Draining and filling system with coolant → Chapter |
|
|
|
