Fabia Mk2
Note
|
| 1 - | Heat shield |
| 2 - | 8 Nm |
| 3 - | 26 Nm |
| q | replace |
| q | coat stud bolts of exhaust manifold with hot bolt paste -G 052 112 A3- before installing. |
| 4 - | Exhaust manifold with integrated catalytic converter |
| q | Pay attention to the part number |
| q | Inspecting catalyst → Vehicle diagnosis, testing and information system VAS 5051 |
| 5 - | Lambda probe -G39-, 50 Nm |
| q | in front of the catalytic converter |
| q | coat only thread with hot bolt paste -G 052 112 A3-; hot bolt paste must not get into the slot of the probe body |
| q | Testing lambda probe upstream of catalytic converter -G39- and lambda control → Vehicle diagnosis, testing and information system VAS 5051. |
| 6 - | Sealing ring |
| q | replace |
| 7 - | Heat shield - short |
| q | for vehicles without air conditioning |
| 8 - | Heat shield - extended |
| q | for vehicles with an air conditioning system |
| 9 - | 22 Nm |
| 10 - | 23 Nm |
| 11 - | Pre-exhaust pipe |
| q | with decoupling element |
| q | do not twist decoupling element more than 10° - risk of damage |
| q | secure the decoupling element with the transport device -T10403- against overtensioning and flexion |
| 12 - | Double clamp |
| q | align exhaust system free of stress before fitting on → Chapter |
| q | Fitting position: bolts at bottom and horizontal |
| q | Tighten bolted connections evenly |
| 13 - | Retaining strap |
| q | replace if damaged |
| 14 - | 20 Nm |
| 15 - | Support |
| 16 - | 40 Nm |
| q | replace |
| q | coat stud bolts of exhaust manifold with hot bolt paste -G 052 112 A3- before installing. |
| 17 - | Lambda probe downstream of catalytic converter -G130-, 50 Nm |
| q | coat only thread with hot bolt paste -G 052 112 A3-; hot bolt paste must not get into the slot of the probe body |
| q | Testing lambda probe - G130- and lambda control downstream of catalytic converter → Vehicle diagnosis, testing and information system VAS 5051 |
| 18 - | Sealing ring |
| q | replace |