Checking the fuel tank venting 04.10 ? |
Special tools and workshop equipment required |
t
| Hand vacuum pump, e.g. -V.A.G. 1390 - or hand vacuum pump -VAS 6213- |
l
| The ignition must be switched off. |
–
| Remove the ventilation line -1- from the activated charcoal filter to the activated charcoal filter system solenoid valve 1 -N80 --2-. |
–
| Connect hand vacuum pump -VAS 6213- to vent line -1- as shown. |
–
| Operate the hand vacuum pump several times. No vacuum should build up. |
–
| Check the ventilation opening below the cover -4- on the activated charcoal filter -3- for dirt, clean as required. |
–
| Remove the cover -4-, shut off the ventilation opening on the activated charcoal filter and once again operate the hand vacuum pump several times. A vacuum should build up. |
–
| Replace activated charcoal filter. |
|
|
|