skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing exhaust gas recirculation valve N18 with EGR potentiometer G212 and EGR control motor V338 for eng > < Removing and installing radiator for exhaust gas recirculation (Fabia II, Roomster)

Fabia Mk2

Testing the mechanical exhaust gas recirculation valve for engine with identification characters AXR, BSW (Fabia II, Roomster)
Testing the mechanical exhaust gas recirculation valve for engine with identification characters AXR, BSW (Fabia II, Roomster)
Special tools and workshop equipment required
t  Hand vacuum pump, e.g. -VAS 6213- or -V.A.G 1390-
Test sequence
   
–  Lift the engine cover at the sides -arrows A- and pull out towards the front -arrow B-.
–  Disconnect vacuum hose from mechanical exhaust-gas recirculation valve.
  S10-0374
–  Connect hand vacuum pump -V.A.S 6213- or -V.A.G 1390- to valve and operate.
–  Detach hose of hand vacuum pump from mechanical exhaust gas recirculation valve.
l  Closing of the valve should be clearly audible.
  S26-0193

Removing and installing exhaust gas recirculation valve N18 with EGR potentiometer G212 and EGR control motor V338 for eng > < Removing and installing radiator for exhaust gas recirculation (Fabia II, Roomster)