Fabia Mk2
| Summary of components for engine with identification characters BLS |
Note| t | The actuation of the exhaust gas recirculation system is performed by the engine control unit -J248- for the EGR valve -N18- with EGR potentiometer -G212- and EGR control motor -V338-. |
| t | The mechanical exhaust gas recirculation valve with cone-shaped valve plunger makes it possible to achieve different opening cross-sections at different valve strokes. |
| t | Always replace self-locking nuts. |
| 1 - | Gasket |
| q | replace |
| 2 - | Intake manifold |
| 3 - | Sealing ring |
| q | replace |
| 4 - | Supports |
| 5 - | Intake manifold flap motor -V157- |
| 6 - | from charge-air cooler |
| 7 - | 10 Nm |
| 8 - | Exhaust gas recirculation valve -N18- with EGR potentiometer -G212- and EGR control motor -V338- |
| 9 - | Gasket |
| q | replace |
| 10 - | Radiator |
| q | for exhaust gas recirculation |
| 11 - | 22 Nm |
| 12 - | Support |
| 13 - | 22 Nm |
