Diesel Direct Injection: Fitting Locations (AXR, BSW)
| Engines with engine code AXR, BSW |
| Components A through H are not represented in the overview figure. |
| A - | Diesel direct injection system relay -J322- |
| q | on relay carrier → Fig. |
| B - | Glow plug relay -J52- |
| q | on relay carrier → Fig. |
| C - | Low heat output relay -J359- |
| q | on relay carrier → Fig. |
| D - | High heat output relay -J360- |
| q | on relay carrier → Fig. |
| E - | Fuel pump relay -J17- |
| q | on relay carrier → Fig. |
| F - | Accelerator pedal position sender -G79- |
| q | in footwell on the accelerator pedal → Fig. |
| G - | Brake light switch -F- and brake pedal switch -F47- |
| q | in footwell on the brake pedal → Fig. |
| H - | Clutch pedal switch -F36- |
| q | in footwell on the clutch pedal → Fig. |
| 1 - | Valve block |
| q | Component parts of the valve block are: |
| t | Exhaust gas return valve -N18- |
| t | Solenoid valve for charge pressure control -N75- |
| 2 - | Mechanical exhaust gas recirculation valve and intake manifold flap motor -V157- |
| 3 - | Coolant temperature sender -G62- |
| 4 - | Air mass meter -G70- |
| 5 - | Engine control unit -J623 - |
| 6 - | Fuel temperature sender -G81- |
| 7 - | Connector |
| q | 3-pin, grey |
| q | for engine speed sender -G28- |
| q | 3-pin, black |
| q | for camshaft position sensor -G40- |
| 8 - | Engine speed sender -G28- |
| q | removing and installing → Chapter |
| 9 - | Camshaft position sensor -G40- |
| 10 - | Intake manifold pressure sender -G71 - with intake manifold temperature sender -G72- |
| 11 - | Fuel filter |
| q | Summary of components → Chapter |
|
|
|
|
