skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Inspecting ceramic glow plugs (Superb II, Octavia II, Fabia II, Roomster) > < Removing and installing the ceramic pencil type glow plugs (Superb II, Octavia II, Fabia II, Roomster)

Fabia Mk2

Inspecting metal glow plugs (Superb II, Octavia II, Fabia II, Roomster)
Inspecting metal glow plugs (Superb II, Octavia II, Fabia II, Roomster)
Special tools and workshop equipment required
t  Handheld multimeter -V.A.G 1526 B-
Test conditions
l  Ignition off.
Test sequence
–  Unplug connector of the glow plugs.
–  Connect handheld multimeter -V.A.G 1526 B- for resistance measurement between contact and glow plug housing.
l  Nominal resistance value: less than 1 Ω
If the nominal resistance value is exceeded (greater than 1 Ω), then the glow plug is defective.
–  Replace defective glow plug → Chapter.
–  Check glow plugs one after the other in all cylinders.
–  Re-insert pulled out plugs of glow plugs.
   

Inspecting ceramic glow plugs (Superb II, Octavia II, Fabia II, Roomster) > < Removing and installing the ceramic pencil type glow plugs (Superb II, Octavia II, Fabia II, Roomster)