| Removing and installing parts of the cooling system |
WARNING | Hot steam or hot coolant may escape when the compensation bottle is opened. Cover the cap with a cloth and open carefully. |
|
Note | t
| When the engine is warm the cooling system is under pressure. If necessary reduce pressure before repairs. |
| t
| The hose connections are secured with spring-type clips. In the event of repairs only use spring-type clips. |
| t
| Use pliers for spring strap clips to fit the spring strap clips. |
| t
| Always replace seals and gasket rings. |
| t
| When installing fit the coolant hoses free of stress, without them touching any other components (pay attention to the markings on the coolant connections and hoses). |
| t
| The arrows affixed to the coolant pipes and the coolant hoses must stand opposite one another. |
|
|
|
