Skoda Workshop Service and Repair Manuals > Fabia Mk2 > Heating, ventilation, air conditioning system | Heating, Air conditioning | Air conditioner | Removing and installing parts of the air conditioning system - engine compartment | Removing and installing, inspecting high pressure senderG65

Removing and installing, inspecting high pressure senderG65

Removing and installing, inspecting high pressure sender -G65-

Removing and installing

Note

The refrigerant circuit remains closed, connection to valve.

–	Switch off the ignition and all electrical components.

–	Unplug the 3 pin plug connection -1-.

–	Unscrew high pressure sender -G65--2-.

Tightening torque: 8 Nm

–	Replace O-Ring (10.80 mm; 1.82 mm) -3-, moisten with refrigerant oil and carefully insert in the connection slot -4-.

Functional test

The function of the high pressure sender -G65- is checked via self-diagnosis of the air conditioning system control unit -J301- → Vehicle diagnostic, testing and information system VAS 5051.

Skoda Workshop Service and Repair Manuals