| –
| Consecutively insert the release tool-2- into the recesses -arrow A- in the catch pegs -3- and unlock the catch peg by swiveling out the release tool -arrow B-. |
| –
| Lock the catch peg by sliding the release tool -arrow C- into the opening of the catch peg -arrow D-. |
| –
| Pull out the vent after inserting the eight release tools. |
Note | Take out the release tools immediately after removing the vent so that the catch pegs are not under any unnecessary stress. |
| –
| Press the vent at the concealed frame into the installation frame in the dash panel, until the catch pegs click audibly into place. |
| –
| Perform a functional test. |
|
|
|
