Fabia Mk2
Sealing flanges and flywheel - Summary of components |
Note
The sealing flange on the belt pulley side -2- is made of plastic. The sealing ring -1- and a circumferential silicone seal for the cylinder block and for the oil pan is integrated in it → Fig.. |
1 - | Sealing ring |
q | Only possible to replace complete with sealing flange → Chapter |
q | Do not additionally lubricate or grease sealing lip of the gasket ring |
q | before installing, remove oil residues on crankshaft journal and cylinder block with a clean cloth |
2 - | Sealing flange |
q | on belt pulley side |
q | replace |
q | removing and installing → Chapter |
3 - | Cylinder block |
4 - | The two-mass flywheel |
q | removing and installing → Chapter |
q | Assembly is only possible in one position through offset holes. |
5 - | 60 Nm + torque a further 90° (1/4 turn) |
q | replace |
6 - | Intermediate plate |
q | must be positioned on dowel sleeves |
q | do not damage/bend during assembly work |
q | hang on the sealing flange → Fig. |
7 - | 15 Nm |
q | replace |
8 - | Sealing flange |
q | on gearbox side |
q | can only be replaced complete with gasket ring and with rotor of engine speed sender -G28- |
q | replace → Chapter |
9 - | Engine speed sender -G28- |
q | removing and installing → Chapter |
|
|