skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Testing mechanical exhaust gas recirculation valve > < Parts of exhaust gas recirculation - Summary of components

Fabia Mk2

Removing and installing exhaust gas recirculation radiator
Removing and installing exhaust gas recirculation radiator
For engine with engine code BNM, BNV
Special tools and workshop equipment required
t  Catch pan, e.g. -VAS 6208-
t  Hose clamps -MP 7-602 (3094)-
t  Pliers for spring strap clamps
–  Remove engine cover → Chapter.
   
–  Remove charge-air pipe at the top -1- with connecting hose -2--arrows-.
–  Remove intake manifold flap motor -V157-.
–  Place a catch pan under the engine.
–  Pinch off coolant hoses with hose clamps -MP 7-602 (3094)- and disconnect the hoses from the cooler.
–  Unscrew exhaust gas recirculation radiator from mechanical exhaust gas recirculation valve → Chapter (Pos. 4).
–  Unscrew exhaust gas recirculation radiator from intake manifold → Chapter (Pos. 1).
–  Unscrew the exhaust gas recirculation radiator from the exhaust manifold and remove radiator.
Install
–  Installation is carried out in the reverse order. Pay attention to the following:
  Note
t  Replace the gaskets and the self-locking nuts.
t  Secure all hose connections with hose clips.
–  Top up coolant → Chapter.
  S10-0371

Testing mechanical exhaust gas recirculation valve > < Parts of exhaust gas recirculation - Summary of components