Fabia Mk2
|
| 1 - | Exhaust manifold |
| q | with exhaust turbocharger |
| q | must be replaced completely |
| q | removing and installing → Chapter |
| 2 - | Intake manifold |
| 3 - | from charge-air cooler |
| 4 - | Gasket |
| q | replace |
| q | with bead to intake manifold |
| 5 - | 25 Nm |
| 6 - | Gasket |
| q | Check fitting position |
| 7 - | from air filter |
| 8 - | Support |
| q | for heat shield (Pos. 11) |
| 9 - | Washer |
| 10 - | 25 Nm |
| 11 - | Heat shield |
| q | fasten in the holder (Pos. 8) |
| 12 - | Hollow screw, 15 Nm |
| 13 - | Sealing ring |
| q | replace |
| 14 - | of valve block |
| q | Connection diagram for vacuum hoses → Chapter |
| 15 - | Oil return line, 30 Nm |
| q | to cylinder block |
| 16 - | 15 Nm |
| 17 - | Gasket |
| q | replace |
| 18 - | Front exhaust pipe |
| 19 - | 25 Nm |
| q | replace |
| 20 - | Connection fittings, 30 Nm |
| q | replace |
| q | before connecting the oil feed line fill connection fitting with engine oil. |
| 21 - | Oil feed line, 22 Nm |
| q | from oil filter bracket → Chapter |
| q | Check oil feed line for continuity before installing. |
| q | removing and installing → Chapter |
| 22 - | 10 Nm |
| 23 - | Support |