skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Coolant pump and coolant regulator > < Remove and install coolant recirculation pump 2V178

Fabia Mk2

Replace coolant temperature senderG62
Replace coolant temperature sender -G62-
(Fabia II, Roomster, Rapid)
Replace
l  Engine is cold
–  Briefly open the cap for the coolant expansion reservoir in order to remove the remaining pressure in the coolant system.
–  Remove air filter → Chapter.
–  Remove the sound dampening system → Body Work; Rep. gr.50.
   
–  Release the fixing screw -1- from the charge air pipe, slacken the clamp -2 or 3-.
–  Release fixing screw -arrow- from charge air pipe.
  S15-0533
–  Detach the connecting hose -arrow- as far as possible from the vibration damper.
–  Push the left charge air pipe to the left.
  N15-10517
–  Disconnect plug -4- at the coolant temperature sender -G62-.
  Note
t  In order to collect flowing out coolant, place a cloth below the connection fitting.
t  Have a new coolant temperature sender -G62- with a new gasket ring ready.
–  Remove the retaining clip -3-, pull the coolant temperature sender -G62- out of the connection fitting and install a new coolant temperature sender -G62-.
–  Inspect coolant level, top up with coolant if necessary → Chapter.
Further installation occurs in reverse order.
  A19-10975

Coolant pump and coolant regulator > < Remove and install coolant recirculation pump 2V178