Skoda Workshop Service and Repair Manuals > Fabia Mk2 > Power unit | 1.6/55; 66; 77 kW TDI CR Engine | Exhaust system | Removing and installing parts of the exhaust system | Tighten exhaust gas temperature sender 3G495, vehicles with right-hand drive

Tighten exhaust gas temperature sender 3G495, vehicles with right-hand drive

Tighten exhaust gas temperature sender 3 -G495-, vehicles with right-hand drive

(Fabia II, Roomster)

WARNING

In this case, the setting of the torque wrench must be 29 Nm.

The correct torque of 45 Nm is achieved by the extension of the torque wrench using the wrench from the set of tools -T10395/6-.

Only coat the thread with hot bolt paste -G 052 112 A3-.

–	Screw in exhaust gas temperature sender 3 -G495- by hand.

–	Then set the recommended tightening torque with the torque wrench together with the wrench from the set of tools -T10395/6-.

Skoda Workshop Service and Repair Manuals