–
| Unplug connector -1- from the engine control unit. |
–
| Unclip cable clip -3--arrows-. |
The engine is removed together with the wiring loom. |
–
| Disconnect all cables for the engine, gearbox and starter motor which will get in the way during removal. |
Vehicles fitted with a manual gearbox |
Note Do not depress the clutch pedal. |
Vehicles with automatic gearbox |
Vehicles with air conditioning |
WARNING Do not open the refrigerant circuit of the air conditioning system. |
|
Note In order to avoid damage to the AC compressor as well as to the refrigerant lines and hoses, ensure that the lines and hoses are not over-tensioned, kinked or bent. |
–
| Secure the air-conditioning compressor with attached lines to the assembly carrier. |
Continued for all vehicles |
–
| Remove pre-exhaust pipe: |
t
| Vehicles with engine identification characters BTS → Chapter. |
t
| Vehicles with engine identification characters CFNA → Chapter. |
t
| Vehicles with engine identification characters CLSA: |
|
|
|