Skoda Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing V-ribbed belt|Install >
< Removing and installing V-ribbed belt
Fabia Mk2
Power unit
1.6/77 kW MPI engine
Enginecrankshaft group, pistons / Cylinder block - Belt pulley side / moving_and_installing_v-ribbed_belt/">Removing and installing V-ribbed belt
Removing
Removing
Removing
Special tools and workshop equipment required
t
Locking pin -T10060A- or 4 mm hexagon wrench
–
Mark the rotation direction of the V-ribbed belt.
Vehicles without air conditioning
–
Swivel tensioning pulley with an open-end wrench in
-direction of arrow-
.
–
Lock the tensioning pulley with the locking pin -T10060A- or with the 4 mm hexagon wrench.
Vehicles with air conditioning
–
Swivel tensioning pulley with an open-end wrench in
-direction of arrow-
.
–
Lock the tensioning pulley with the locking pin -T10060A- or with the 4 mm hexagon wrench
-1-
.
Continued for all vehicles
–
Remove the release ribbed V-belt.
Power unit
1.6/77 kW MPI engine
Enginecrankshaft group, pistons / Cylinder block - Belt pulley side / moving_and_installing_v-ribbed_belt/">Removing and installing V-ribbed belt
Removing
Removing and installing V-ribbed belt|Install >
< Removing and installing V-ribbed belt