Fabia Mk2
Note
|
1 - | Radiator |
q | removing and installing → Chapter |
q | after replacing fill entire system with fresh coolant |
2 - | Coolant hose |
q | to exhaust gas turbocharger |
3 - | Coolant hose |
q | to radiator for charge-air system |
4 - | Coolant hose |
q | to exhaust gas turbocharger |
5 - | Coolant hose |
q | to charge-air cooler in the intake manifold |
6 - | The fan ring |
7 - | Coolant hose |
q | to coolant pipe below the intake manifold |
8 - | Coolant hose |
q | to engine oil cooler |
9 - | Expansion reservoir |
q | with coolant shortage warning light sender -G32- |
q | Check the cooling system for tightness → Chapter |
10 - | Connector |
11 - | Screw cap |
q | Testing the pressure relief valve in the cap → Chapter |
12 - | 5 Nm |
13 - | Plastic inserts |
q | for fixing screws |
14 - | Support |
15 - | Coolant hose |
q | at coolant recirculation pump -V50- |
16 - | Radiator fan -V7- |
17 - | Fan shroud |
q | removing and installing → Chapter |
18 - | 2 Nm |
q | mounted up to 05.10 |
19 - | Heat shield |
q | mounted up to 05.10 |
20 - | 8 Nm |
21 - | Bottom radiator bearing |
22 - | Charge air cooler |
23 - | Coolant hose |
q | at coolant regulator housing |
24 - | Thermo-switch for radiator fan -F18-, 35 Nm |
q | for fan |
25 - | O-ring |
q | replace if damaged |
26 - | Top radiator bearing |
27 - | 5 Nm |
28 - | Coolant hose |
q | to the expansion reservoir |