skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Installing timing chain > < Remove timing chain

Fabia Mk2

Removing and installing the drive chain for oil pump
Removing and installing the drive chain for oil pump
Removing
   
–  Pull off the cover -1- from the oil pump.
–  Mark with a felt-tip pen the direction of rotation of the drive chain for oil pump.
  N15-10556
–  Unscrew the fixing screws -arrows- of the oil pump.
–  Remove the complete oil pump from the drive chain.
  N15-10560
–  Remove the drive chain for oil pump -1- from the rear ring gear -2- of the crankshaft gear.
Install
  N15-10559
–  Place the drive chain for oil pump -1- on the rear ring gear -2- of the crankshaft gear.
  N15-10559
–  Hook the oil pump with the chain sprocket into the drive chain and tighten the new screws -arrows- to 14 Nm + torque a further 90° (1/4 turn.).
  N15-10560

Installing timing chain > < Remove timing chain