Fabia Mk2
Summary of components |
1 - | 150 Nm + torque a further 180° (1/2 turn) |
q | replace |
q | The clamping surface of the fixing screw must be free of grease and oil. |
q | insert oiled (thread) |
q | Counterhold belt pulley with counterholder -T30004 (3415)- with bolt -T30004/2 (3415/2)- to prevent it from turning |
2 - | Belt pulley |
q | removing and installing → Chapter |
q | Clamping surfaces must be free of oil and grease. |
3 - | Diamond coated washer |
q | diamond coated washer pressed onto the belt pulley |
q | replace if damaged |
4 - | Sealing ring |
q | replace |
5 - | Engine |
6 - | 60 Nm + torque a further 90° (1/4 turn) |
q | replace |
7 - | Flywheel |
q | on vehicles with automatic gearbox - the two-mass flywheel version |
q | removing and installing → Chapter |
8 - | Intermediate plate |
q | must be positioned on dowel sleeves |
q | do not damage/bend during assembly work |
9 - | 10 Nm |
q | replace |
10 - | Sealing flange on the gearbox side |
q | Only replace sealing flange complete with gasket ring and rotor |
q | replace → Chapter |
11 - | Engine speed sender -G28-, 5 Nm |
q | with captive screw |
q | removing and installing → Chapter |
12 - | 5 Nm |