Fabia Mk2
| Part I |
| 1 - | Connecting hose |
| q | at camshaft housing |
| 2 - | Connector |
| q | for intake manifold pressure sender -G71- |
| 3 - | Connector |
| q | for solenoid valve for coolant pump control |
| 4 - | 10 Nm |
| 5 - | Non-return valve |
| q | for crankcase ventilation |
| 6 - | Connecting hose |
| q | to exhaust gas turbocharger |
| 7 - | O-ring |
| q | replace |
| 8 - | Intake manifold |
| q | removing and installing → Chapter |
| q | with intake manifold pressure sender -G71- |
| t | The intake manifold pressure sender -G71- is attached to the intake manifold only using a plastic clip. |
| t | If the plastic clip is damaged, attach the sender to the intake manifold with screws → Electronic Catalogue of Original Parts. Tightening torque: 3 Nm. |
| 9 - | Connecting hose |
| q | to the coolant pump |
| 10 - | Solenoid valve for coolant circuit -N492- |
| 11 - | Connection fittings |
| 12 - | Clamp |
| 13 - | Fuel hose |
| q | to high pressure pump |
| 14 - | Solenoid valve 1 for activated charcoal filter -N80- |
| 15 - | Connecting hose |
| q | to the activated charcoal filter system |
| 16 - | Connecting hose |
| 17 - | Connector |
| q | for throttle valve control unit -J338- |
| 18 - | Connecting hose |
| 19 - | Connector |
| q | for charge pressure sender -G31- with intake air temperature sender 2 -G299- |
