skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Aerial for GPS navigation > < Removing and installing the navigation system
Plug connections on the navigation system
Plug connections on the navigation system
   
Multipin plug connection -A-, 16-pin, two-piece
1 - Speaker + rear right
2 - Speaker + front right
3 - Speaker + front left
4 - Speaker + rear left
5 - Speaker - rear right
6 - Speaker - front right
7 - Speaker - front left
8 - Speaker - rear left
9 - Convenience system CAN bus (high)
10 - Convenience system CAN bus (low)
12 - Terminal 31
13 - Control signal
14 - Outside actuation
15 - Terminal 30
16 - Terminal 30 - (anti-theft code control signal, „SAFE“)
Multipin plug connection -B-, 12-pin
1 - MDI - audio input, left channel (as of MY 2011)
2 - MDI - audio earth (as of MY 2011)
3 - CD changer, audio earth
4 - CD changer, voltage supply, terminal 30
6 - CD changer, DATA output
7 - MDI - audio input, right channel (as of MY 2011)
8 - CD changer, left channel, CD/L
9 - CD changer, right channel, CD/R
10 - CD changer, control signal
11 - CD changer, DATA input
12 - CD changer, CLOCK
Multipin plug connection -C-, 12-pin
6 - Telephone input signal, TEL -
12 - Telephone input signal, TEL +
  Note
t  Plug contacts which have not been listed are not used.
t  The assignment of the stated plug contacts depends upon the vehicle equipment.
  S91-0069

Aerial for GPS navigation > < Removing and installing the navigation system