skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Removing and installing the headlight range control adjuster > < Switches on Dash Panel, in the Centre Console and in Doors
Removing and installing light switch
Removing and installing light switch
Removing
–  Switch off the ignition and all electrical components.
–  Turn the turning handle of the light switch to position „0“.
   
–  Press in the turning handle of the light switch firmly -arrow 1- and slightly turn it to the right -arrow 2-.
–  Hold the turning handle in this position and pull the light switch housing out to the front -arrow 3-.
–  Disconnect plug connection at switch.
Install
–  Mount the plug connection.
–  Carefully push the light switch into the opening until the switch audibly locks into place.
  S96-0156

Removing and installing the headlight range control adjuster > < Switches on Dash Panel, in the Centre Console and in Doors