| Replacing light bulbs in the halogen headlight - as of MY 2011 |
WARNING | H4 light bulbs are pressurized and can burst when changing the bulb - risk of injury! Wear gloves and safety spectacles when changing the lamps. |
|
Note | t
| Do not touch the glass bulb with bare hands when changing the bulb, use clean material gloves. The remaining finger print would evaporate through the heat of the switched on bulb and condense on the reflector, which impairs the luminosity of the headlight. |
| t
| When installing the rubber caps, pay attention to the correct fitting. Water ingress can destroy the headlight. |
| t
| Before changing the bulb, switch off the ignition and all electrical components. |
|
|
|
