| Voltage stabilizer -J532- |
| The voltage stabilizer -J532- is located under the front passenger seat. |
| Its task is to stabilise the high voltage drop of the on-board power supply, resulting from the start-stop operation, to 12 volts. |
| If it becomes apparent that the electrical consumers (such as radio/navigation, telephone, dash panel insert) must be reset at each engine start, while operating the start-stop system, this indicates that the voltage stabilizer is defective. |
| –
| Switch off the ignition and all electrical components. |
| –
| Slide the front passenger seat as far forward as possible and lift it up (if possible). |
| –
| Loosen the voltage stabilizer which is fastened to the floor covering with a velcro fastener from the seat backrest. |
| –
| Disconnect the plug connection. |
| Installation is carried out in the reverse order. |
|
|
|
