skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Bleed the headlamp cleaning system > < Removing and installing the lift cylinder for spray nozzles of headlights - up to MY 2010

Fabia Mk2

Removing and installing the lift cylinder for spray nozzles of headlights - as of MY 2011
Removing and installing the lift cylinder for spray nozzles of headlights - as of MY 2011
   
–  Pull the spray nozzles with cover -1- slightly out of the bumper by uniformly gripping on both sides of the cover, then grip the spray nozzles and pull out up to the stop.
–  Unclip the cover -1- from the bearing -arrows-.
–  Remove front bumper → Body Work; Rep. gr.63.
  N92-10099
–  Press off the catches -arrows A- using a small screwdriver and push the lift cylinder -1- out of the bumper -arrow B-.
Install
Installation is performed in the reverse order, pay attention to the following points:
–  Push the lift cylinder into the brackets in the bumper until it clicks audibly into place.
–  Hoses with angled pieces must click audibly into the connections on the lift cylinders for spray nozzles.
–  Install bumper.
–  After completing the assembly work bleed the headlamp cleaning system → Chapter.
  S92-0098

Bleed the headlamp cleaning system > < Removing and installing the lift cylinder for spray nozzles of headlights - up to MY 2010