skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing wiper motor from linkage > < Removing and installing the wiper arms with wiper blades and setting their final setting

Fabia Mk2

Removing and installing wiper motor with linkage
Removing and installing wiper motor with linkage
Removing
–  Switch off the ignition and all electrical components.
–  Remove wiper arms with wiper blades → Chapter.
–  Remove the cooling water tank cover and protective grille → Body work; Rep. gr.66.
   
–  Remove the two fixing screws -1- (7 Nm).
–  Unplug connector -2- at wiper motor.
–  Push wiper motor in direction of engine -arrow-, push out of the positioning pin -3- and remove together with linkage.
Install
–  Installation is carried out in the reverse order.
  S92-0083

Removing and installing wiper motor from linkage > < Removing and installing the wiper arms with wiper blades and setting their final setting