Octavia Mk1
Summary of components of bumper ► 12.01 |
1 - | Lock carrier |
2 - | 1 Nm |
q | Wheelhouse liner attached. |
3 - | Cross member |
Removing: |
– | Remove bumper (Pos. 6). |
– | Remove nuts (Pos. 12). |
– | Remove screws (Pos. 14). |
Installation is carried out in the reverse order. |
4 - | Nut |
5 - | 8 Nm |
q | Accessible after removing the bumper strip (Pos. 9). |
6 - | Bumpers |
Removing: |
– | Open front flap. |
– | Remove screws (Pos. 2). |
– | Disconnect bumper strip (Pos. 9). |
– | Remove the screws (Pos. 5) on both sides. |
– | Remove ventilation grid (Pos. 11). |
– | Remove screws (Pos. 8). |
– | Remove screws (Pos. 13). |
– | Unclip plug connections if necessary. |
– | Detach the washer nozzles of the headlamp cleaning system (only on vehicles with headlamp cleaning system). |
– | Remove bumper to the front. |
Installation is carried out in the reverse order. |
7 - | Temperature sensor |
q | Only for vehicles with multifunctional indicator. |
8 - | 1 Nm |
9 - | Bumper strip |
10 - | Spoiler |
q | Pressed on into the bumper clips. |
q | Must not be removed for removing the bumper. |
q | For vehicles 08.00 ► integrated in the bumper. |
11 - | Ventilation grid |
12 - | 20 Nm |
13 - | 1 Nm |
14 - | 23 Nm |
15 - | Support |
q | For vehicle 08.00 ► 12.01 |
q | Bondings → Chapter |