Skoda Workshop Service and Repair Manuals > Octavia Mk1 > Body | Body Work | Front door, central locking | Front door

Removing and installing the front door

Removing

–	Remove trim panel from the bottom of pillar A → Chapter.

–	Pull off multi-pin connector -1- from pillar A.

For vehicles ► 12.99

–	Remove cap and screw the grub screw -1- out of the upper hinge.

For vehicles 01.00 ►

–	Remove nut -2-.

For all vehicles

–	Release bottom screw -3-.

–	Lift door up and out of the hinge brackets.

Install

Installation is carried out in the reverse order.

Note

After the paintwork, the screws -1- and -2- must be tightened to the specific torque when replacing the doors.

1 -

32 Nm

2 -

22 Nm

Skoda Workshop Service and Repair Manuals