Remove self-adhesive foil 4x4 from the heatable rear window |
Note t
| Observe undamagability of the heated cross-wire for the rear window. |
t
| When working wear recommended proper protection (protective gloves). |
If necessary use the work sequence → Chapter. |
t
| Glue remover 3M Scotchcal 221 |
–
| Slightly shake glue remover content and pour the specified quantity into the reservoir. |
–
| Apply a layer of glue remover evenly onto the foil with a brush or a roller. |
–
| Allow to work for approx. 15 minutes (glue remover forms a cohesive layer of jelly). |
–
| Remove foil in a sharp angle through extensive pulling. |
–
| Clean surface with spirit solution. |
|
|
|