Summary of components of centre console 08.98 ► |
1 - | Collar for the shift lever |
2 - | Damping for gearshift (only for SDI) |
–
| Remove covering for the handbrake lever → Chapter. |
–
| Pull out ashtray insert. |
–
| Remove collar for shift lever -1-. |
–
| Take off shift cover -4- including frame -3-. |
–
| Screw out screws -6- and remove front ashtray. |
–
| Carefully slacken the trim panel of the 6 supports which connect the centre console to the middle of the dash panel, using a thin screwdriver. |
–
| Remove the trim panel from the supports towards the rear and pull it over the gearshift lever. |
Installation is carried out in the reverse order. |
|
|
|