| Removing and installing airbag control unit -J 234- |
| –
| Disconnect earth strap of the battery. |
| –
| Remove right footwell covering on driver's side. |
| –
| If necessary, cut the carpet and insulation matting around the control unit. |
| –
| Turn the locking element of the control unit plug -1- as far as possible until it locks again. |
| –
| Disconnect plug connection -1-. |
| –
| Unscrew the nuts -2- (3x). |
| –
| Remove control unit -3-. |
| –
| Installation is carried out in the reverse order. |
Note | t
| When replacing the control unit repeat coding → Chapter. |
|
|
|
